Horizontal Bars |
Single Bar Trainers |
JF Competition Horizontal Bar - $
FIG Approved, Ultrasonically Checked Rail,
High Tensile Stainless Steel Rail, Height
Adjustment 275cm-310cm |
JF Club Single Bar Trainer - $1843.00
Click System Height Adjustment 80cm-290cm,
4 Point Cable System, Interchangeable Rail,
Includes High Tensile Stainless Steel Rail |
SA Competitive Horizontal Bar - $1499.00
Meets FIG Specs, Exclusive 8 Point Cable
System, Hight Quickly Adjustable 255cm-295cm,
High Flex Steel Rail
|
SA Performance Series Single Bar - $1495.00
Spotting Platforms Included, Bar Adjustable 250cm-280cm &
130cm-230cm, Floor Pattern 11'8.5"x5'6.5", Rail NOT Included |
Elite Horizontal Bar - $2350.00
FIG Approved, Features Copper Compression
Sleeves, Height Adjustable 225cm-295cm,
Stainless Steel Rail |
SA Single Bar Trainer w/o Rail- $935.00
Fully Adjusable 165cm-270cm, 4 Point Cable System,
Maximum
Flex Uprights, Rail NOT Included |
Floor Bars |
SA Single Bar Trainer - $1395.00
Either Steel or Composite Rail, Fully Adjustable 165cm-270cm,
4 Point Cable System, Maximum Flex Uprights |
Fenner 6" Floor Bar - $135.00
High Quality Steel Construction, Origional Design, Non-Marring
Rubberized Foot Pads, Solid Maple 1.5" Rail, 6" Off Floor |
U-Base Single Bar Trainer - $2400.00
Quick Release Graphite X Rail, Adjustable 112cm-232cm
(20cm Increments), 232cm-252cm (5cm Increments),
Features Copper Compression Sleves, Safetly Collars |
Fenner 12" Floor Bar - $145.00
High Quality Steel Construction, Origional Design, Non-Marring
Rubberized Foot Pads, Solid Maple 1.5" Rail, 12" Off Floor |
Single Bar Trainer - $1600.00
Adjustable 110cm-230cm (20cm Increments), 230cm-260cm
(5cm Increments), Copper Compression Sleves,
Graphite X Rail, Safety Collars |
SA 7'6" Pirouette Bar - $495.00
Fiberglass Composite Rail, Fits Standard Mat,
Steel Base, Protective Foot Pad |
5' Fenner Bolt Down Trainer w/o Rail - $475.00
High Quality Steel Construction, Spin Lock/Snap Lock
Adjustment, Origional Designer, Adjustable 5' |
Parts & Accessories |
8' Fenner Bolt Down Trainer w/o Rail - $730.00
High Quality Steel Construction, Spin Lock/Snap Lock
Adjustment, Origional Designer, Adjustable 8' |
JF Replacement Rail - $
Ultrasonically Checked Rail, Made
w/High
Tensile Stainless Steel |
 3' Fenner Bolt Down Trench Bar w/o Rail- $550.00
High Quality Steel Construction, Spin Lock/Snap Lock
Adjustment, Origional Designer, Adjustable 3' |
SA Steel Rail - $460.00
Meets FIG Specs, Fits, SA Bar Sets
|
Non-Cable Single Bar Trainer - $1250.00
Width 94.5", Adjustable 60"-72" Graphite X Rail,
16 Floor Anchors Included |
Quick Release Rail - $550.00
Stainless Steel Bar w/ Texture Finish |
SA Freestanding Low Bar - $697
Spin Lock/Snap Lock Adjustibility, Standard Fiberglass
Composite Rail, Stablizer Cross Bar |
EAS Strap Bar Kit - $
Includes PVC, Set of 6 Straps
|
Spotting Platforms |
Hand Stand Trainer - $345.00
Freestanding, Use w/ Floor Bar |
JF Trainer Console - $
2 Positions, Self Retracting w/Gas
Spring, Fixes Permantly to Floor |
Tumble Trak Frame Bar - $269.00
1.5" TDiameter Rail, Attaches to
Frame, Tumbl Trak ONLY |
SA Spotting Deck - $161.00
Fits SA Maximizers ONLY |
Chalk |
Spotting Platform - $385.00
Fits AAI Single Rail Only |
36# Case Block Chalk - $180.00
Magnisum Carbonate, 2oz Blocks |
Floor Plates |
24# Case Bulk Chalk - $60.00
Magnisum Carbonate, Broken Pieces & Blocks |
Concrete Floor Plate - $27.00
Includes Concrete Plate and
Cement Mixture, One Floor Plate |
EAS Chalk Bucket - $
5 Gallon Bucket, Bulk Chalk, Cable |
Wood Over Concrete Floor Plate - $40.00
Includes Installation Hardware,
Cement Mixture, One Floor Plate |