Uneven Bars |
Single Bar Trainers |
JF Competition Uneven Bars - $
Fig Approved, Dual Cable System, Slide Lock, Fiberglass Composite Rail, High Bar Adjustable 226cm-276cm, Low Bar Adjustable 146cm-196cm, Width Adjustment w/o Increments 110cm-180cm |
SA Performance Series Single Bar - $1495.00
Spotting Platforms Included, Bar Adjustable 250cm-280cm &
130cm-230cm, Floor Pattern 11'8.5"x5'6.5", Rail NOT Included |
JF Club Frestand Uneven Bars -$3786.00
Meets FIG Standards, High Bar Adjustable 205cm-250cm,
Low Bar Adjustable 100cm-180cm, Fiberglass
Composite Rails, Completely Freestanding |
SA Single Bar Trainer w/o Rail- $935.00
Fully Adjusable 165cm-270cm, 4 Point Cable System,
Maximum
Flex Uprights, Rail NOT Included |
JF Club Uneven Bars - $
Meets FIG Standards, Single Cable System, High Bar
Adjustable 205cm-250cm, Low Bar Adjustable 135cm-180cm,
Width Adjustment w/o Increments 100cm-180cm,
Fiberglass Composite Rails |
SA Single Bar Trainer - $1395.00
Either Steel or Composite Rail, Fully Adjustable 165cm-270cm,
4 Point Cable System, Maximum Flex Uprights |
SA Pro Uneven Bars - $2495.00
Complete w/Ultra-Flex Composite Rail, Positive Lock Quick
Pin Adjustment, 8 Point Cable System w/Self Locking Slide
Tensioners, Floor Pattern 18'1.5"x13'1.5"
|
U-Base Single Bar Trainer - $2400.00
Quick Release Graphite X Rail, Adjustable 112cm-232cm
(20cm Increments), 232cm-252cm (5cm Increments),
Features Copper Compression Sleves, Safetly Collars |
Elite Uneven Bars - $3500.00
FIG Approved, Dual Slide Colar Adjustment 95cm-192cm, Low
Bar Adjustable 155cm-185cm, High Bar Adjustable
235cm-265cm, Graphite X Rails |
Single Bar Trainer - $1600.00
Adjustable 110cm-230cm (20cm Increments), 230cm-260cm
(5cm Increments), Copper Compression Sleves,
Graphite X Rail, Safety Collars |
Space Saving Systems |
5' Fenner Bolt Down Trainer w/o Rail - $475.00
High Quality Steel Construction, Spin Lock/Snap Lock
Adjustment, Origional Designer, Adjustable 5' |
Space Savers w/Pads- $746.00
Complete Set of 4, Pads Covered in 18oz Vinyl,
Floor Pattern 12'6"x8'6", Compatible w/All Brands,
Installation Insturctions & Floor Anchors Included |
8' Fenner Bolt Down Trainer w/o Rail - $730.00
High Quality Steel Construction, Spin Lock/Snap Lock
Adjustment, Origional Designer, Adjustable 8' |
SA Maximisers - $718.00
Set of 4, Floor Pattern 14'4"x10', Complete w/Floor
Anchors
& Installation Instructions, Safety Pads NOT Included |
 3' Fenner Bolt Down Trench Bar w/o Rail- $550.00
High Quality Steel Construction, Spin Lock/Snap Lock
Adjustment, Origional Designer, Adjustable 3' |
SRS System w/Pads- $1025.00
Dual Tensioning System, Carpet Bonded Foam Pads,
Compatible w/All AAI Equipment, Floor Anchors &
Installation Insturctions Included, Floor Pattern 12'x14' |
Non-Cable Single Bar Trainer - $1250.00
Width 94.5", Adjustable 60"-72" Graphite X Rail,
16 Floor Anchors Included |
Accessories |
SA Freestanding Low Bar - $697
Spin Lock/Snap Lock Adjustibility, Standard Fiberglass
Composite Rail, Stablizer Cross Bar |
JF Fiberglass Composite Rail - $
Fits All JF Uneven Bars & High Bars |
Fenner Star-Bar System - $895.00
Space Saving w/4 Bar Stations, Each Bar Fully Adjustable 5"-60",
Spin Lock/Snap Lock Adjustmet, Rail NOT Included, Origional Designer |
SA Ultra Flex Composite Rail - $460.00
Fits All Spieth Anderson Models
|
Floor Bars |
Graphite X Rail - $475.00
Fits All AAI UTB Models |
Fenner 6" Floor Bar - $135.00
High Quality Steel Construction, Origional Design, Non-Marring
Rubberized Foot Pads, Solid Maple 1.5" Rail, 6" Off Floor |
Assist Step - $125.00
Clamps to 2-3/8" Upright |
Fenner 12" Floor Bar - $145.00
High Quality Steel Construction, Origional Design, Non-Marring
Rubberized Foot Pads, Solid Maple 1.5" Rail, 12" Off Floor |
Mount Trainer - $275.00
Constructed of 18oz Vinyl, Shaped, "Stiff" Foam Construction |
SA 7'6" Pirouette Bar - $495.00
Fiberglass Composite Rail, Fits Standard Mat,
Steel Base, Protective Foot Pad |
Fenner Heavy Duty Tensioner - $
Set of 4, Steel Construction, Pull & Push Handles,
Rollerbearings, Origional Design |
Spotting Platforms |
Delux Cable Tensioners - $525.00
Set of 4, Pullies 6" on Center |
JF Trainer Console - $
2 Positions, Self Retracting w/Gas
Spring, Fixes Permantly to Floor |
EAS Strap Bar Kit - $
Includes PVC, Set of 6 Straps |
SA Spotting Deck - $161.00
Fits SA Maximizers ONLY |
Hand Stand Trainer - $345.00
Freestanding, Use w/ Floor Bar |
Spotting Platform - $385.00
Fits AAI Single Rail Only |
Bar Buddies - $295.00
Set of 2, Attaches to All Uneven
Models, Anchor to Floor |
Chalk |
UTB Stabilizers - $280.00
Pair, Requires 12'6"x12'6" Floor
Space, Anchors to Floor |
36# Case Block Chalk - $180.00
Magnisum Carbonate, 2oz Blocks |
Tumble Trak Frame Bar - $269.00
1.5" TDiameter Rail, Attaches to
Frame, Tumbl Trak ONLY |
24# Case Bulk Chalk - $60.00
Magnisum Carbonate, Broken Pieces & Blocks |
Floor Plates |
EAS Chalk Bucket - $
5 Gallon Bucket, Bulk Chalk, Cable |
Concrete Floor Plate - $27.00
Includes Concrete Plate and
Cement Mixture, One Floor Plate |
|
Wood Over Concrete Floor Plate - $40.00
Includes Installation Hardware,
Cement Mixture, One Floor Plate |
|